6
INSTALLATION
CONNECTIONS
Notes about handling cables
Cables and connectors are not included with the product.
*
Notes on cables (for door stations, etc.)
Use PE (polyethylene)-insulated PVC jacket cable.
•
Parallel or jacketed 2-conductor, mid-capacitance, non-shielded
cable is recommended.
Never use individual conductors, twisted pair cable, or coaxial cable.
•
Pair4
Pair3
12345678 12345678
Pair2
Pair1
T568A
Pair4
Pair2
Pair3
Pair1
T568B
Notes on CAT5e cables (for residential stations)
Do not bend the cables to an extent where the radius is
•
less than 25 mm (1”). Communication failure could result.
Do not remove the CAT5e cable jacket more than
•
necessary.
This unit is not a computer peripheral. Do not connect it
•
to a LAN network.
CAT5e cable
25mm (1") or more
Less than 25mm (1")
CAT5e cable
Arrange the color code of the RJ45 connections in accordance
•
with EIA/TIA-568A or 568B.
Be sure to check the condition of cable connections with a
•
LAN checker before connecting with a LAN cable.
An RJ45 connector with a cover cannot be connected to the port
•
for CAT5e. Use a cable without a cover.
Do not pull or put excess strain on CAT5e cables.
•
Use a straight-through cable for connecting units.
•
To Next Page
Loading...
