26
FUNCTIONS COMBINED WITH EXTERNAL DEVICES
Triggering an alarm by using an external
device
This is available when the inputs 1, 2, and/or 3 of the master
*
station are set to “UTILITY”, and an external device, such as
a sensor or a call button, is connected to each of the inputs.
When an external device is triggered
A message is displayed, the external device ID is shown, and
an alarm sounds on all the residential stations.
The alarm will not sound when "ALARM AT DOOR" is set
*
to "DISABLE" and the volume of call tone from a residential
station is set to 0.
To stop the alarm
Touch
RESET
, or press the [HOME] button.
NOTE:
If two or more inputs are triggered, the latter one takes priority.
Releasing a door with another door
release button
This is available when one or two door release buttons are
*
connected to the external door release inputs 1 and/or 2 of
this station.
The door at the door station 1 or 2, or both doors can be
unlocked by pressing the connected button(s) during a call-in,
communication, or while monitoring a door station.
Activating an external device
This is available when an external device is connected to the
*
option contact outputs of the master station.
Activating external device
Touch
OPTION
from HOME window or while communicating
with/monitoring a door station. The device will be triggered.
Transferring alarm to external device
When detecting designated action, this station transfers alarm
to the device.
NOTE:
OPTION
is not displayed on the screen.
Using a foot switch
This is available when a foot switch is connected to the
*
external talk inputs of this station.
A foot switch works similarly to touching
TALK
or
END
on the
touchscreen.
To Next Page
Loading...
