14
SETTING AND ADJUSTMENT
Program system settings using master station after all devices are installed. Program individual device settings on all master and sub
master stations separately.
Mainly, the results of settings made on the master station are also applied to the sub master stations. The settings and adjustments to
be made on an individual sub master station are as in the table below.
NOTE:
First change the display language for the screen to the language you need on the master station before starting the settings and adjustments on a sub
master station.
SETTING LIST
To begin, touch
SETTINGS
from HOME window to program the settings before using this station for the fi rst time.
Category Item Sub item Setting range Default
CALL
DOOR STATION
SETTINGS *
1
DOOR1/DOOR2/DOOR3/DOOR4 ENABLE/DISABLE ENABLE (for each)
ROOM STATION CALL
SETTINGS *
1
ID1/ID2/ID3/ID4/ID5/ID6/ID7/ID8
(The ID number of this station is
not displayed.)
ENABLE/DISABLE ENABLE (for each)
TALK
PRIVACY MODE - ENABLE/DISABLE DISABLE
MONITOR
ROOM MONITOR - ENABLE/DISABLE ENABLE
GENERAL
SOUND SETTING AUDIBLE TOUCH TONE - ENABLE/DISABLE ENABLE
DOOR
RELEASE *
1
- DOOR1/DOOR2/DOOR3/DOOR4 ENABLE/DISABLE ENABLE (for each)
PIN SETTING - CURRENT PIN/
NEW PIN
(Select four numbers from 0 – 9) 1111
ADJUST
- 1 - 10 6
VOLUME
/ / /
0 (mute), 1 - 10 6 (for each)
NOTES:
The screen will turn off if approx. one minute elapses with no operation on this station. When it occurs, if the setting is not complete, start from
•
the beginning.
The above list is a brief overview of the setting items available on this station. The descriptions, and the style and order of descriptions do not
•
necessarily equate with the actual displays.
*
1
: It is required to enter PIN before programming can begin.
To Next Page
Loading...
