Aiphone JP-4HD - Setting the PIN [GENERAL] - [PIN SETTING]; Call settings [CALL]

15
PART NAMESINSTALLATION USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Setting the PIN
[GENERAL] - [PIN SETTING]
When this station is started up for the fi rst time or after
this station is rebooted, program this setting fi rst.
Some settings require a PIN to prevent content from being
altered by unauthorized individuals.
Create a unique PIN to properly secure settings.
The factory default is "1111".
*
From HOME window, touch
1
SETTINGS
→
GENERAL
→
PIN SETTING
.
The current PIN entry window is displayed.
Enter the current 4-digit PIN. (For fi rst time users,
2
default is "1111").
Touch
3
ENTER
.
The new PIN entry window is displayed.
If a wrong PIN is entered, an error message will be
*
displayed requesting the correct PIN.
Enter the new 4-digit PIN.
4
When the setting has fi nished, touch
5
ENTER
.
The new PIN is memorized.
You can change the PIN any time by following the above
procedure.
NOTES:
When this station is initialized by the [INSTALL] menu, the PIN
•
returns to "1111" (default).
You must keep the PIN without fail. If you forget the PIN, you
•
must initialize this station by the [INSTALL] menu, thus all the
setting contents return to default.
Call settings [CALL]
You can make the following settings for call.
■
Designate door stations allowed to call-in to
this station [DOOR STATION SETTINGS]
You can set whether or not this station receives a call from
the door station 1 to 4. Individual settings can be programmed
for each door station. When there is a call from a door station
that is set to “DISABLE”, no call tone sounds and no image is
displayed on this station.
From HOME window, touch
1
SETTINGS
→
CALL
→
DOOR STATION SETTINGS
.
The PIN entry window is displayed.
Enter the 4-digit PIN by using the touchscreen, and
2
then touch
ENTER
.
“DOOR1” to “DOOR4” are displayed.
If a wrong PIN has been entered, an error message is
*
displayed. Enter correct PIN.
To change the setting for “DOOR1”, select “ENABLE”
3
or “DISABLE”.
ENABLE ......Allows this station to receive a call from door
station 1.
DISABLE .....Does not allow this station to receive a call
from door station 1.
Repeat for other door stations.
4
When the setting has fi nished, touch
5
ENTER
.
SETTING AND ADJUSTMENT DETAILS