14
Confi rmation and Preparation
Part Names and Function
Monitor the video from the
video door station.
(Page 30)
*For monitoring, change the
setting.
(Page 46)
If the subject is backlit or it
is too dark to see clearly, the
image will be adjusted for
easy viewing.
(Page 25)
Monitor/Adjust button
Remove protective fi lm
before use.
Master station
Open when inserting or
replacing the battery pack.
(Page 22, Page 52)
Battery cover
The master station ringtone and the voice of the other person can be heard from here.
Speaker
•
Loud sounds can occur suddenly, so keep this section away from your ear.
Caution
* Not a touch panel.
(Page 16)
LCD screen
Press to answer a call from
the video door station.
Talk but ton
Function buttons
(F1, F2, F3)
Status Notifi cation content
Priority
Red
fl ashing
The remaining battery power
of the video door station is
low. Replace the battery.
(Page 51)
High
↕
Low
Blue
fl ashing
There is an unviewed image
recording. (Page 31) Can be
confi gured not to blink. (Page
44)
On red Charging.
*1 When there are multiple notifi cations
at the same time, items are displayed in
order to priority.
Status indicator
Microphone
End the communication or
monitoring.
OFF button
Charging stand
Antenna (internal)
Avoid covering the internal antenna with your hand.
Doing so may worsen reception during communication.
(Page 15)
AC adapter
(Cord length: approx. 1.8 m)
Please fi t the
appropriate plug
until it clicks.
To Next Page
Loading...
