Aiphone WL-11 - Setting Date and Time

23
Installation
Setting the Date and Time
Set the date and time before using it for the fi rst time. This date and time is used for the listed
dates and times of recordings.
Notes
• The date and time may revert back to the default setting when, for example, the battery pack is
removed, etc. In such cases, set the date and time again.
• Clock accuracy may deviate as much as ±1 minute per month. We recommend confi guring the date
and time periodically.
1
Press
F3
(Menu) on the standby
screen
The menu screen will be shown.
2
Select "Date & Time" using
F2
(V)
and press
F3
(Select)
The date and time confi guration screen will
be shown.
3
Confi gure the current date and
time using
F1
(Λ) or
F2
(V) and
press
F3
(Select)
• The item to be confi gured fl ashes in
yellow.
• How to change the date and time
F1
(Λ): Increases the value by 1.
F2
(V): Decreases the value by 1.
•
If
F1
is pressed when the maximum
value is displayed, the value returns to
the minimum value.
4
Repeat Step
3
and confi gure the
month, year, hour, and minute
A "beep" is heard when the confi guration is
fi nished.