45
Confi guration
Video door station settings
When the call button of the door station was pressed
Set Enable/Disable for the Night
Illumination LED
Configure whether to switch on the
illumination of the video door station
automatically at night individually during calls/
communication or monitoring.
The default setting is "Disable".
1
Press
F3
(Menu) on the standby
screen
The menu screen will be displayed.
2
Select "Door Station Settings"
using
F2
(V) and press
F3
(Select)
The Video Door Station Settings screen will
be displayed.
3
Select "Night Illumination LED"
using
F2
(V) and press
F3
(Select)
The Night Illumination LED settings screen
will be displayed.
4
Select "During Call/
Communication" or "During
Monitoring" using
F2
(V) and
press
F3
(Select)
To Next Page
Loading...
