30
Use
View outside
View (monitor) the entrance
1
Press on the standby
screen.
After about nine seconds, a view of the
entrance will be displayed on the screen,
and audio can be heard.
* Sounds inside cannot be heard outside.
When talk to the other party
Press
2
Press to end monitoring
Notes
• The following operations can be performed
during monitoring.
- Visibility correction (Page 25)
- Switching the screen format (Page 26)
- Manual image recording (Page 28)
• Even when
“End” is not pressed,
monitoring will be ended automatically after
approx. one minute.
•
When a call is received from the video door
station during monitoring, automatic image
recording will start approx. two seconds after the
call button of the video door station is pressed.
When is pressed, communication starts.
Video door station video and audio can be monitored.
Notes
•
This function can be used only when "Door Monitoring settings" is "Enable".
(Page 46)
To Next Page
Loading...
