Part Names and Function
18
Confi rmation and Preparation
Video door station
Microphone
Illumination sensor
Speaker
Press the button to
place a call to the
master station.
(Page 24)
Call button
The LED light will
automatically illuminate in
low-light settings when a
call is placed. The light will
turn off at the end of a call.
The light will also turn ON
when
of the
master station is pressed at
night.
* Change the setting
to switch on the night
illumination LED. (Page
45)
Camera angle
adjustment lever
Open when inserting or
replacing a battery.
(Page 19, Page 51)
Battery cover
Mounting frame
These holes are intended
for water to pass through.
Do not obstruct them.
Drain holes
Camera
Remove protective fi lm
before use.
Locking screw
LED for night illumination
(Page 19)
To Next Page
Loading...
