29
Use
1
Press and hold for two
seconds or longer during
communication
A “be-beep” sound is
will be heard, and “
”
will be displayed.
When talking
2
Continue pressing “Talk”
while talking
Talking
will be displayed at the top section of the
screen.
* The other party's voice cannot be heard
while the button is pressed.
When listening
2
Release
“Talk”
Talking
will disappear from the top of the screen.
*
The other party cannot hear your voice.
Notes
• During press-to-talk communication, the other
person can hear your voice only when
is
being pressed.
• Press-to-talk cannot be off until
communication is ended.
When the ambient noise is too loud to talk (Press-to-Talk)
This unit prioritizes the loud side and switches automatically so the quiet side can be heard.
Press-to-talk is useful when the ambient noise is loud enough to interrupt audio.
Hello
Woof,
woof
Woof,
woof
Woof,
woof
Woof,
woof
To Next Page
Loading...
