Air Techniques ScanX Swift - Warnings and Symbols; Instruction Manual; Scanx Swift

Air Techniques, Inc. Page 6
Alerts users to important Operating
and Maintenance instructions. Read
carefully to avoid any problems.
Alerts users to special instructions
and useful notes concerning device
usage.
Unplug power supply adapter to re-
move all power!
ON / OFF button
Only use once (disposable item) Wear protective gloves
3. Warnings and Symbols
3.1 Instruction Manual.
The following warnings and symbols have been used throughout this manual.
3.2 ScanX Swift.
The model identification plate can be found on the rear of the ScanX Swift. The following terminology and/
or symbols are used in conjunction with this appliance, model identification plate and power unit:
Warning dangerous
voltage.
Date of manufacturer
REF
SN
Model No.
Serial No.
Class 2 Power supply
adapter
Laser beam class 3B when
covers are removed
4005460
Air Techniques, Inc.
1295 Walt Whitman Road
Melville, New York 11747 USA
The ScanX Swift is a Class I Laser Product [Class 1 Laser Product (IEC)]
This warning label identifies the ScanX Swift as such a product
and describes the potential danger to humans in the event the
product is opened during service. There is no laser radiation from
this product when operated and maintained as instructed.
The Laser Product Accession Number is 0212282-00
Important Information
Alerts user to electrostatic
sensitive devices