Models
2 3A0994E
Models
This equipment is not intended for use with flammable or combustible materials used in places such as cabinet shops
or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must comply
with NFPA 33 and OSHA requirements for the use of flammable and combustible materials.
Model Name Series
Dispense Rate gpm
(lpm)
Hose Length and
Diameter
Gun Model Maximum Working Pressure
SP200
Mustang 2400
A
0.24 gpm
(0.91 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
Mustang 2 2800 psi (19 MPa, 193 bar)
SP300
Mustang 3100
A
0.34 gpm
(1.29 lpm)
1/4 in. x 50 ft
(6.4 mm x 15m)
500 Series 3000 psi (21 MPa, 207 bar)
To Next Page
Loading...
