Need help?Do you have a question about the AirLive IP-200PHD-24 and is the answer not in the manual?
Lists key features of the IP camera, including resolution, compression, and protocols.
Provides step-by-step instructions for mounting and connecting the camera.
Explains how to use the IP Wizard software to discover and configure the camera's IP address.
Guides on installing the camera behind a NAT router, utilizing UPnP.
Steps to access and log into the camera via its web-based user interface.
How to enlarge the video feed and use ActiveX features like Zoom, Snapshot, Record.
How to take still pictures (snapshots) and start/stop video recordings.
Configuring network parameters like DHCP, DNS, IP address, and HTTP port.
Setting up Dynamic DNS for remote access using a domain name.
Adjusting image parameters like rotation, white balance, brightness, and sharpness.
Performing factory resets, backups, and firmware upgrades.
Setting up specific video profiles with codec, resolution, and quality parameters.
Managing usernames, passwords, and login privileges for users and viewers.
Configuring motion detection windows and sensitivity.
Managing SD card status, configuration, and automatic cleanup settings.
Viewing recorded files and configuring FTP/TCP/HTTP servers for events.
Specifying schedules for event triggers and defining actions.
Troubleshooting login issues, forgotten credentials, and IP address detection.
Setting up virtual server ports on the router for remote image viewing.
Guides through the process of creating a DynDNS account and hostname.
Lists key features of the IP camera, including resolution, compression, and protocols.
Provides step-by-step instructions for mounting and connecting the camera.
Explains how to use the IP Wizard software to discover and configure the camera's IP address.
Guides on installing the camera behind a NAT router, utilizing UPnP.
Steps to access and log into the camera via its web-based user interface.
How to enlarge the video feed and use ActiveX features like Zoom, Snapshot, Record.
How to take still pictures (snapshots) and start/stop video recordings.
Configuring network parameters like DHCP, DNS, IP address, and HTTP port.
Setting up Dynamic DNS for remote access using a domain name.
Adjusting image parameters like rotation, white balance, brightness, and sharpness.
Performing factory resets, backups, and firmware upgrades.
Setting up specific video profiles with codec, resolution, and quality parameters.
Managing usernames, passwords, and login privileges for users and viewers.
Configuring motion detection windows and sensitivity.
Managing SD card status, configuration, and automatic cleanup settings.
Viewing recorded files and configuring FTP/TCP/HTTP servers for events.
Specifying schedules for event triggers and defining actions.
Troubleshooting login issues, forgotten credentials, and IP address detection.
Setting up virtual server ports on the router for remote image viewing.
Guides through the process of creating a DynDNS account and hostname.
General| Frame Rate | 30 fps |
|---|---|
| Compression | H.264, MJPEG |
| Network Interface | 10/100Mbps Ethernet |
| Audio | Built-in Microphone |
| Wireless | No |
| Operating Temperature | -10°C to 50°C |
| IR Distance | 20m |
| Power Supply | DC 12V |
| Image Sensor | 1/2.7" CMOS |
| Minimum Illumination | 0 Lux (IR on) |
| Day/Night | IR Cut Filter with Auto Switch |
To Next Page
