7.1.2. Sensitivity: Adjust sensitivity 0~100%, the higher sensitivity means more precisely
and detailed face detection.
7.1.3. Event Conditions: Once you want to change the trigger condition, you have to
select the event interval by NONE, Daily, Hourly or User Define and Quantity. For
example, if you set Trigger Quantity for 5 people and interval with “1 Minute”, IP
Camera detects 5 faces will trigger alarm. In the following one minute, camera won’t
trigger alarm even though there are more than 5 faces are detected. After one
minute, camera will trigger alarm again if it detects 5 faces again.
To Next Page
Loading...
