Aiwa NSX-SZ310 - Electric Power and Maintenance; Service and Repair

Electric Power
1 Power sources — Connect this unit only to power sources
specified in the Operating Instructions, and as marked on
the unit.
2 AC power cord
- When disconnecting the AC power cord, pull it out by the
AC power plug. Do not pull the cord itself.
- Never handle the AC power plug with wet hands, as this
could result in fire or shock.
- Power cords should be firmly secured to avoid being
severely bent, pinched, or walked upon. Pay particular
attention to the cord from the unit to the power socket.
- Avoid overloading power socket and extension cords
beyond their capacity, as this could result in fire or shock.
3 When not in use — Unplug the AC power cord from the
power socket ifthe unit will not be used for several months
or more, When the cord is plugged in, a small amount of
current continues to flow to the unit, even when the power
is turned off.
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or fiquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit doesnot seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTENPT TO SERVICE THE UNIT YOURSELF.
System and accessories
NSX-SZ34
CX-NSZ310 Compact disc stereo cassette recever
SX-NSZ312 Front speakers
Remote control
FM antenna
MW/LW antenna