Aiwa NSX-SZ310 - Front Panel Controls; Display and Timer Information

Main uait: front
@ DEMO/ECO
When the unit is turned off: switches DEMO on and off.
When the unit is turned on: enters ECO or dimmer setting
mode.
© POWER OSTANDBY/ON
Switches the unit on and off (standby).
© TAPE DECK 1/2
Selects Tape function, and deck 1 or 2.
TUNER/BAND
Selects Radio function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
cD
Selects CD function.
To display the timer setting
Press TIMER.
The timer-on time, the source and the timer-activated duration
are displayed for 6 seconds.
Tip:
Timer setting can be displayed even while the unit is turned
off, and at that time if you press ENTER or 8 within 6 seconds
after TIMER is pressed, you can enter the timer setting mode
and change the setting.
To change the timer setting
Re-set the timer again.
To cancel the timer
Press TIMER repeatedly until "© OFF" is displayed. "©"
disappears from the display.
Tip:
Your timer setting is retained even if the timer is cancelled.
Next time the timer is activated, you can change your previous
setting, or simply use the same setting again.
© PHONES jack
Plug in here an optional headphones set with a standard
stereo plug (96.3 mm). Speaker output is cancelled.
HISET
CD and Tape: pauses playback.
Radio: stores the received station to preset.
MCLEAR
CD and Tape: stops playback.
Radio: clears a station preset.
PRESET
CD and Tape: starts playback.
Radio: tunes into a preset station.
<<4/K4<DOWN, PP /PPIUP TUNING
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Radio: manually tunes down or up within the band.
GEQ
Selects a sound equalization curve.
BBE
Enhances high frequency sound.
T-BASS
Emphasizes low frequency sound.
6
Timer recording
Timer recording is available only for TUNER and VIDEO/AUX
(with on external timer) sources.
7 Press either TUNER/BAND or VIDEO/AUX to
select a source.
2 Press TIMER repeatedly until "©REC" appears
on the display.
3 Carry out step 3 to step 5 described in "Timer
playback’.
4 Prepare the source.
To tecord the radio, select the band and tune in to the
desired station.
To record external equipment connected to the VIDEO/
AUX jacks, set an external timer for the equipment so that
its playback begins at the same time.
5 Insert the recording tape in DECK 2 and then turn
the unit off.
7)
MULTI JOG
CD: skips to a previous or a succeeding track,
Radio: selects a preset number.
Clock and Timer: sets the time.
ECO and Dimmer: selects the mode.
ENTER
Determines the mode and the time (ECO, dimmer, clock
and timer).
TIMER
Enters timer setting mode.
© VOLUME
19)
Adjusts the volume.
DISC DIRECT PLAY 1-3
Selects a CD tray.
DISC CHANGE
Rotates the CD trays.
4 OPEN/CLOSE
Opens or closes the disc compartment.
SYNC DUB
Starts dubbing a whole tape.
@REC/REC MUTE
Starts recording.
19