AJA OG-UDC - Page 28

OG-UDC 3G-SDI Up, Down, Cross-Converter v1.0 28 www.aja.com
To Reboot the OG-UDC
1. Click the Reboot button in the lower panel of DashBoard. The reboot
conrmation message displays.
Figure 24. Reboot confirmation window
2. Click Yes. The message "Loading data, please wait. Refreshing device data"
displays for a moment. The card will be oine for a few seconds, and any
current conversion operations will be interrupted.
3. Following a Reboot operation, the board conguration will return to the
settings that were in place at the time of rebooting.