Need help?Do you have a question about the AJA FS1 and is the answer not in the manual?
General| Frame Sync | Yes |
|---|---|
| Up/Down/Cross-Conversion | Yes |
| Frame Synchronizer | Yes |
| Video Inputs | 1x 3G/HD/SD-SDI, 1x HDMI |
| Video Outputs | 1x 3G/HD/SD-SDI, 1x HDMI |
| Power Supply | 100-240V AC, 50/60Hz |
| Weight | Approx. 1.5 kg |
Lists the key features and functionalities of the FS1 product.
Describes controlling the FS1 remotely via a web browser.
Details the front panel layout, buttons, and indicators of the FS1.
Guides on using front panel buttons to navigate menus and adjust parameters.
Illustrates and describes the connectors on the rear panel of the FS1.
Provides detailed descriptions of each connector type on the FS1.
Provides a high-level overview of the FS1 installation and setup process.
Details how to connect the FS1 to a network for remote control.
Details how to access and control the FS1 using a web browser.
Provides step-by-step instructions for updating FS1 firmware via the web interface.
Guides on using the front panel menus to configure FS1 settings.
Selects the type of upconversion for SD source input.
Selects the type of downconversion for HD source input.
Selects SD-to-SD aspect ratio conversion modes.
Selects the reference video source for genlocking.
Explains how to remotely monitor and adjust FS1 parameters using a web browser.
Sets audio and video input/output formats and related parameters.
Offers settings for upconverter, downconverter, and aspect ratio converters.
Allows saving, recalling, exporting, and importing FS1 preset configurations.
To Next Page
