Need help?Do you have a question about the AJA FS4 and is the answer not in the manual?
General| Supported video modes | 525i, 625i, 720p, 1080i, 1080p, 2160p |
|---|---|
| Maximum video resolution | 4096 x 2160, - pixels |
| Input voltage | 100 - 240 V |
| Input frequency | 50/60 Hz |
| Power consumption (typical) | 55 W |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Gray |
| Converter type | Active video converter |
Weight and Dimensions| Depth | 406.4 mm |
|---|---|
| Width | 444.5 mm |
| Height | 44.45 mm |
| Weight | 3200 g |
Provides a general introduction to the FS4 frame synchronizer and converter, its versatility, and modes of operation.
Details the FS4's digital video connectivity, processing capabilities, and supported formats.
Describes the FS4's audio capabilities, including sample rate conversion and channel mapping.
Explains the different ways to control the FS4: front panel, web browser, and GPI.
Provides a high-level overview of the FS4's architecture and operating modes.
Details the FS4's front panel controls, including buttons, knobs, display, and status LEDs.
Explains how to change FS4 operational parameters using the front panel controls.
Details the FS4's rear panel connectors and their functions.
Provides a summary of the steps for installing and setting up the FS4.
Details how to connect the FS4 to a network using DHCP or a static IP address.
Explains the procedure for downloading and installing software updates for the FS4.
Provides guidance on connecting video and audio inputs/outputs and configuration examples.
Explains FS4 operating modes and how menu parameters affect operation.
Describes the status display pages for monitoring system status and information.
Details parameters for controlling the FS4 via front panel, browser, or GPI.
Covers parameters for network, system name, SNMP, alarms, and screen saver configurations.
Explains adjustments for sample rate converters, Mix Down Modes, and system-wide settings.
Details how to save, edit, and recall FS4 preset configurations.
Describes accessing and controlling the FS4 using a web browser.
Details how to view and change FS4 network settings like IP address and subnet mask.
Allows control over alarm settings for power supply, video format, and reference.
Displays the overall FS4 operational status, allowing parameter adjustments.
Explains how to name the FS4, select modes, and configure display and fan settings.
Defines SNMP and how the FS4 acts as a network element issuing trap messages.
Details parameters for enabling SNMP and setting trap destinations and ports.
Details video processing features like deinterlacing, proc amp, color corrector, and legalizer.
Lists supported input to output format conversions within frame rate families.
Explains the types of upconversion and downconversion the FS4 performs.
Details the audio matrix, input/output capabilities, and processing controls.
Provides pinout details for the DB-25F GPI connector (inputs and outputs).
Details the pinout scheme for AES/EBU digital audio connections.
Provides Federal Communications Commission (FCC) compliance information.
Presents translated safety warnings and instructions for product operation.
Outlines the terms and conditions of the FS4's five-year limited warranty.
To Next Page
