AJA FS4 - System Buttons

www.aja.com
21
FS4 Frame Synchronizer/Converter v1.1
System Buttons
STATUS Displays the Status Menu Group, which shows current machine status and error
conditions:
•Video Input and status
•Caption status
• Reference and Genlock status
•Output status
• Power and Temperature status
•System Name display
•Alarms
REMOTE Displays the Remote Menu Group, which lets you select how to control the FS4:
• Control by local front panel only, remote sources only, or local and remote
• Authentication
• GPI input and output behavior
VIDEO Displays the System Video Menu Group, which lets you change or enable system wide
video functions:
• Output frame rate selection
• Genlock reference source selection
• Monitor output settings
• Video input format settings, including 3G setup
CONFIG Displays the Config Menu Group, which lets you configure the FS4 for your environment:
• System Name setting
• FS4 Mode (Single Channel or Four Channel)
• IP settings, MAC address
• SNMP settings
•Alarm control
• Hidden Menus, Screen Saver, and Display intensity
•Fan speed
• System serial number and software version
•System reboot
AUDIO Displays the System Audio Menu Group, which lets you change or enable system audio
functions:
•MADI Output mode
• Audio Input Sample Rate Conversion (Embedded, AES, MADI
• 5.1 and 7.1 Mixdown
• Global Audio Output
• Reset Channel Mapping (Embedded, AES, MADI)
PRESET Displays the Reg Menu Group, which accesses the memory registers:
• Store, Recall, and edit the names of Presets
• Factory Preset (defaults)