www.aja.com
24
FS4 Frame Synchronizer/Converter v1.1
Example Reference and Video Incompatibility Alarms
Video incompatibilities that the FS4 may detect include the following examples:
Figure 5. Web page example of un-supported signals alarm.
Table 1. Video Incompatibility Examples
Video Incompatibility Detected Alarm Status screen will show Video Status screen will show
Genlock Source is set to “Reference”,
but no Reference signal is detected. In
this example the cable has been
disconnected.
IN SDI 1 OK
BKGD Matte OK
GEN Ref No Ref
OUT1 1080i59
IN SDI 1 1080i59
BKGD Matte
GEN Ref No Input
OUT1 UHDp59
Reference signal format is not
compatible with selected Output
Format. In this example the reference
signal is 50 Hz but output is 59.94 Hz.
IN SDI 1 OK
BKGD Matte OK
GEN Ref incompat
OUT 1080i59
IN SDI 1 1080i59
BKGD Matte
GEN Ref 1080i50
OUT1 UHDp59
To Next Page
Loading...
