2
• HD cross-converting with simultaneous downconverted SDI output
• AFD support
• Dual HD/SD SDI inputs and outputs
• Component analog HD/SD input and output
• Composite/S-Video input and output with TBC
• 8-channel AES and balanced analog audio inputs and outputs
• 16-channel embedded audio passed to SDI outputs
• Audio mapping and control with AFV (audio follows video)—
16 channels of embedded audio can be mapped to any 8
• Storage of 10 preset system configurations in memory or external files
• Fully redundant power supplies standard
• 10/100 LAN with SNMP, embedded web server for remote control, and VTECS™
open protocol
• Video Proc Amp
• Closed caption support—including SD-to-HD upconversion
• Chassis styling optimized for use in a wide variety of machine rooms with
simple panel and remote web browser user interfaces
• Front panel alphanumeric and graphical display shows input and output
settings, and is also used for parameter viewing/editing
• LED status indicators for at-a-glance system monitoring
• Two GPI inputs and outputs, TTL, isolated
• Sidebar Keyer
• 5-year international warranty with unlimited technical support
FS1 Front Panel Control
FS1 operation can be monitored and changed in a number of ways:
• Front panel control
• Remote web browser via Ethernet
• VTECS protocol via Ethernet
• SNMP monitoring (Simple Network Management Protocol)
Feature sets in each of the control methods vary, although the front panel and web
browser interfaces offer many of the same features.
The front panel offers the most direct control of the device, which is ideal for
machine rooms or wherever quick changes and status checks must be made.
Chapter 2, Controls and Indicators describes front and rear panel features in detail.
To Next Page
Loading...
