The device developed only for indoor use.
Check the Jeweller signal level at the installation location
If the signal level is low (one bar), we cannot guarantee the stable operation of the
detector. Take all possible measures to improve the quality of the signal. At least,
move the detector: even a 20 cm shift can significantly improve the quality of
signal reception.
If the detector has low or unstable signal strength even after moving, use a
.
Do not install the detector:
Attach the magnet to the right of the detector. The detector is located either inside
or outside the door case (window frame):
ReX
radio signal range extender
1. outside the premises (outdoors);
2. nearby any metal objects or mirrors causing attenuation or screening of the
signal;
3. at any places with fast air circulation (air fans, open windows or doors);
4. inside premises with the temperature and humidity beyond the range of
permissible limits;
5. closer than 1 m to the hub.
To Next Page
Loading...
Need help?
General
