Check the operational capability of the detector regularly. Clean the detector body
from dust, spider web, and other contaminants as they appear. Use soft dry napkin
suitable for tech equipment.
Do not use any substances containing alcohol, acetone, gasoline, and other active
solvents to clean the detector.
The battery life depends on its quality, detector triggering frequency, and ping
interval by the hub.
If the door opens 10 times a day and the detector ping interval is 60 seconds, then
DoorProtect Plus operates 7 years from the pre-installed battery. For instance, a 12-
seconds ping interval reduces the battery life to 2 years.
If the detector battery is low, the system notifies the user, and the LED indicator
smoothly lights up and goes off if a glass break is detected or the tamper is
triggered.
Tech specs
Detector actuation threshold
1 cm (small magnet)
2 cm (big magnet)
Tilt sensor activation threshold 5° or more (customizable)
Shock sensitivity 3 levels
Ignore first shock option Yes
Tamper protection Yes
Frequency band
868.0 – 868.6 MHz or 868.7 – 869.2 MHz
depending on the region of sale
Compatibility
Operates only with , ,
and
Maximum RF output power Up to 20 mW
Battery Replacement
Hub Hub Plus Hub 2
ReX
To Next Page
Loading...
Need help?
General
