During testing, the signal level is displayed in the app and on the keyboard with
security mode indicators (Armed mode), (Disarmed mode), (Night
Mode) and malfunction indicator
X.
If the signal level is low (one bar), we cannot guarantee the stable operation of
the device. Take all possible measures to improve the quality of the signal. At
least, move the device: even a 20 cm shift can significantly improve the quality
of signal reception.
If after moving the device still has a low or unstable signal strength, use a
.
KeyPad is designed for operation when fixed to the vertical surface. When using
KeyPad in hands, we cannot guarantee successful operation of the sensor
keyboard.
States
Parameter Meaning
Temperature
Temperature of the device. Measured on the
processor and changes gradually.
Acceptable error between the value in the app
and the room temperature — 2°C.
The value is updated as soon as the device
identifies a temperature change of at least 2°C.
You can configure a scenario by temperature to
control automation devices
Jeweller Signal Strength Signal strength between the hub and KeyPad
Battery Charge Battery level of the device. Two states available:
radio
signal range extender
1. Devices
2. KeyPad
To Next Page
Loading...
Need help?
General
