AJAX MotionProtect Curtain User Manual

If the MotionProtect Curtain has already been paired with another hub, turn off
the detector, and then follow the standard pairing procedure.
After pairing, the detector will appear on the app’s hub device list. The frequency
of the device status updates depends on the polling interval indicated in the
hub’s settings (36 seconds by default).
If the detector identies movement before the system is armed, it will activate
not immediately but the next it is polled by the hub.
Statuses
Parameter Value
Temperature
The detector’s CPU temperature (changes
gradually)
Signal Strength
The strength of the signal between a hub and
the detector
Battery Charge
The detector’s battery charge, displayed in the
increments of 25%
Lid
The status of the detector’s tamper device that
responds to the detachment and removal
attempts.
Delay When Entering, sec
The delay for security system activation when
entering premises
Delay When Leaving, sec
The delay for security system activation when
leaving premises
Connection
Status of the connection between the hub and
the sensor
Sensitivity
Detector sensitivity:
1. Devices
2. MotionProtect Curtain
Low
High
Normal

AJAX MotionProtect Curtain Specifications

General

Brand	AJAX
Model	MotionProtect Curtain
Category	Security Sensors
Language	English