Akai 4000D - Page 7

iv. DISASSEMBLY OF TAPE TRANSPORT UNIT &
AMPLIFIERS
(1)
Loosen
the
Pinch
Wheel
Cap
(C)
and
remove
the
(2)
Loosen
the
Retaining
Screws
((a)
and
(b))
of
the
Pinch
Wheel
(A)
by
hand.
Loosen
the
Retaining
Head
Cover
(H)
using
a
Philips
head
screw
driver
Screw
using
a
Philips
head
screw
driver
and
remove
and
remove
the
Head
Cover
by
hand.
the
Track
Selector
Knob
(S)
by
hand.
(3)
Loosen
the
Retaining
Screws
of
the
Record
Level
|
(4)
Loosen
the
Retaining
Screws
((a)
and
(b))
of
the
Knobs
((A)
and
(B))
by
using
a
Philips
head
screw
Deck
Control
Knobs
((A)
and
(B))
by
using
a
Philips
driver
and
remove
the
Knobs
by
hand.
head
screw
driver
and
remove
the
Knobs
by
hand.
A
(5) Loosen the Screws ((a) and (b)) by using a Philips (6) Loosen the Screws (marked from (a) to (d)) by
head
screw
driver
and
remove
the
Amplifier
Panel
using
a
Philips
head
screw
driver
and
remove
the
(A) by hand. Deck Panel (D) by hand.
Then, any front mechanism control adjustment is
now accessible.