Akai 4000D - Page 8

(7)
Loosen
the
Screws
(marked
from
(a)
to
(d))
by
(8)
Loosen
the
Screws
((a)
and
(b))
by
using
a
Philips
using
a
Philips
head
screw
driver
and
remove
the
head
screw
driver.
Rubber
Feet
(marked
(A)
to
(D)).
(9) Remove the Tape Transport Mechanism and Amp- (10) Disconnect the Plugs (marked (A) to (C)) and
lifier Assemblies (M) by slowly lifting it from the Record/Playback Conversion Pin (P) carefully by
Case (C) as shown in picture. hand.
i
(11) Loosen the Screws (marked from (a) to (d)) of the (12) Separate the Tape Transport Mechanism Assembly
Deck
Frame
(D)
by
using
a
Philips
head
screw
(M)
from
the
Amplifier
Assembly
(A)
carefully
by
driver. hand.