Akai 4000DS

CONTROLS
310.
11.
12.
CYCLE CONVERSION SWITCH (A)
OUT position 50 Hz, IN. position 60 Hz.
TRACK SELECTOR SWITCH
HEAD COVER
Houses Erase, Recording, and Playback Heads.
SUPPLY REEL TABLE
TAPE GUIDE
INDEX COUNTER & RESET BUTTON
MICROPHONE JACKS (Left & Right)
RECORDING INDICATOR LAMP
Lights when recorder is set to recording mode,
RECORDING LEVEL CONTROL (Left)
Outer Control: Line ; inner Control: Microphone.
HEADPHONE JACK o-
For monitoring sound or private headphone listening. Use
headphones of 8 2 impedance.
VU METERS (Left & Right)
Indicates recording and playback levels.
CAPSTAN STORAGE POST
”
13.
14.
15.
16.
17.
18.
19.
20.
21.
Seeeeeeenen
|
CAPSTAN
Transports tape and controls tape speed. See Tape Speed
Selection procedure.
PINCH WHEEL
Presses against capstan to transport tape.
SHUT-OFF LEVER
See Automatic Shut-Off procedure.
RECORD/PLAYBACK LEVER 7
For playback set to FWD position, and for recording set to
REC position.
TAKE-UP REEL TABLE
FAST FORWARD/REWIND LEVER
See Fast Forward & Rewind procedure.
PAUSE LEVER “
See Pause Control procedure.
START BUTTON
Releases Pause Lever.
POWER/AUTOMATIC SHUT-OFF SWITCH
For turning on power, set to ON position. For automatic
Shut-off, see Automatic Shut-Off procedure.