9
Installing Stylus
1. Position the stylus with its tip facing down.
2. Line up the back of the stylus with the cartridge.
3. Insert the stylus with its front end at a downward angle and gently lift the front of the needle upward until
it snaps into place.
NOTE:
1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a
record’s edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean your records to get rid of dust or grease with a record cleaning brush and record cleaning
solution.
4. Stylus should be replaced periodically (approximately every 600 hours)
5. Do not use cleanser other that contains alcohol, benzene or any other harsh chemicals, which
might damage the paint and finish of the turntable.
WHEN TRANSPORTING YOUR TURNTABLE PLAYER, DO NOT FORGET TO:
1. Mount the protective cap on the stylus.
2. Lock the tonearm clip onto the tonearm.
TIPS FOR BETTER PERFORMANCE
1. When opening or closing the turntable cover, handle it gently, moving it either at the center or equally
from both sides.
2. Never apply harsh chemicals or solvents to any part of the turntable system.
3. Always unplug it from the AC outlet and fasten the tone arm on the tone arm rest with the vinyl
twist-tie before moving the turntable.
MAINTENANCE AND CARE,, ,,,,
Caring for the player
● Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
● The maximum ambient temperature: 35°C
● Electronic products of this kind should never be subjected to extreme temperatures or high humidity.
For instance, this set should not be placed in bathing areas of around stoves and radiators.
To Next Page
Loading...
