3. Hold the CD disc by its edge with CD graphical side facing up and put it onto the CD
compartment after the CD door is opened. Make sure that the disc label is facing up.
4. Close the CD door and make sure no AUX-in device is plugged.
CD playback
After loading the disc, the disc will begin spinning and the total number of the tracks on the
disc will be shown on the display. Press the PLAY/PAUSE button once, the first track on
the CD will be played back.
Play/Pause Control
To pause playback temporarily by pressing the PLAY/PAUSE button. Music playback will
be paused and the current elapsed track number will be shown on the display and the play
icon will be blinking. Press the PLAY/PAUSE button again to resume playback.
Stop playback
To stop playback, press the
STOP
button on the unit. The total number of tracks of the disc
will be displayed.
Skip track
During playback, press the forward or backward SKIP buttons to skip to the next or
previous tracks.
High-speed music search
During playback, press and hold the forward or backward SKIP buttons to skip/search
through the current track at high speed in forward or backward directions. When the SKIP
buttons are released, normal playback speed will be resumed immediately.
Repeat playback modes (Repeat 1 / Repeat all )
Repeat the Current Track
During playback, press the REPEAT button until the icon is displayed to select the
current track to be repeated. The selected track/file will be repeated continuously.
Repeat All Tracks
During playback, press the REPEAT button until icon is displayed. All tracks on
the disc will be repeated continuously.
Return to normal playback
Press the REPEAT button until NO repeat indicator is displayed. The normal playback will
be resumed.
Remark:
• If there is no disc in the unit, “NO” or “ERR” will be indicated on the display.
• If the CD cannot be read
To Next Page
Loading...
