Caution:
There is a danger of explosion if batteries are replaced incorrectly.
Replace batteries with the same type and same brand only.
When the unit is intended for being unused for a long period of the time. Slide the
FUNCTION switch to OFF position and remove all batteries from the main unit.
Connecting AC Power
Connect the small end of AC cord to the socket at the back of the main unit and insert the
plug of AC cord into standard AC wall outlet.
Battery Operation
Before installing batteries (not included), ensure that the unit is disconnected from the
mains supply.
Remove the battery compartment cover on the bottom of the unit by lifting up the two lugs
on the battery cover. The battery cover can then be lifted up.
Install 8 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and
then replace the cover.
For battery operation, unplug the AC cord from the AC wall outlet first and
then remove the AC cord from the socket at the back of the main unit.
Caution:
The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of
AC cord does not fit properly, try to turn it over and try again. Do not force it.
When the unit is intended for being unused for a long period of the time. Please slide
the FUNCTION switch to OFF position
to turn off the unit and unplug the power cord
from the AC wall outlet.
7
POWER CONNECTION
To Next Page
Loading...
