Setting up (AUX IN) connection
AUX IN jack will allow you to connect external music player or external sound source to the
main unit.
1. Slide the FUNCTION switch on the side of the unit to select CD/AUX mode.
2. Plug into a 3.5mm audio cable (not included) into your external music player and
connect the other end (3.5mm plug) into the AUX IN jack on the side of the unit. “AUX”
will be shown on LCD display.
3. Make sure your external music player is turned on.
4. Start music playback on your external music player.
5. Adjust VOLUME knob to control the sound level of music playback from the speakers
on the unit.
12
AUX IN OPERATION
TO DEVICE
EARPHONE
OR AUX OUT (LINE OUT)
To Next Page
Loading...
