Akai EWV2000 - Parameter Editing - VCA Envelope; VCA Envelope Generator Settings; Source Output Level and Vibrato VCO

22
SOURCE 1
PUSH
DISPLAY
VALUE
DOWN
UP
MODE
HOW SOUND
CHANGES
VCA-EG DECAY: XX
00
100
Mode for setting the decay
time for the source 1 VCA
envelope generator.
Level
00
SO
100
-Time
VCA EG
VCA-EG SUSTN: XX oo
100
Mode for setting the sustain
level for the source 1 VCA
envelope generator.
Level
•-Sustainedsound -•
100
50
-Time
VCA EG
VCA-EG RELES: XX
oo
too
Mode for setting the
release time for the source
1 VCA envelope generator.
Set to obtain a release
effect after releasing the
key.
Level
00
SO 100
-Time
Key on
J
Key off
a
VCA EG
VCA-EG DEPTH: XX
00
100
Mode for setting the intensi
ty of the source 1 VCA en
velope. The effect Is maxi
mum when the depth Is set
at 100. When producing
sound with the breath,
always set the depth to 00.
LEVEL
SOURCE-1 OUT: XX
oo
100
Mode for setting the source
1 pitch. At 00, no sound is
produced. 100 is the maxi
mum. When adding to the
source 2 sound, adjust to
between 50 and 100.
V I B
VC0: 00
100
Mode for setting the vibrato
effect.
The source 1 and source 2
VCOs are modulated simul
taneously.
Changes the tone.
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html