Akai EWV2000 - Parameter Editing - Breath and Effects; Breath Control for VCA; Trigger and Filter Mode Selection

24
SOURCE 1
PUSH
DISPLAY
VALUE
DOWN
UP
MODE
HOW SOUND
CHANGES
BREATH VCA
00
100
INTENSITY
Use this mode when you
want to vary the pitch for
the source 1 VCA by the in
tensity of the breath.
The effect is maximum
when the VCA-EG depth is
set to 00 and the BREATH
VCA is set to 100.
ECT
TR I GGER SINGLE
SINGLE
MULTCH
Mode for selecting the type
of trigger to activate the
VCF-EG and VCA-EG.
Usually use at "SINGLE1
At "MULTCH11, a new trigger
is generated each time a
note key is touched.
This makes it possible to
express dynamics for the
pitch according to the in
tensity of the breath. One
trick to editing is to adjust
the BREATH VCA value to
achieve better balance
when the VCF-EG depth is
strong.
"SINGLE" is best for play
ing non-legato or legato
music.
Use "MULTCH" for stac
cato and non-legato music.
(Refer to Page 31)
4
EFFECT
F I LTER
OFF
off
This is an effect filter for
changing the tone with
greater individuality.
1:
2:
3:
Best for violins, violas,
cellos, or other strings.
Best for bassoons or
other woodwinds.
Best for original sounds
Off
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html