136
Tap the location icon at the top of the screen (between the Track and Pad fields) to open the Edit Zones window,
which is a feature for drum tracks. This window displays an overview of any selected pads. Use the Mode selector to
set how the selected pads will be edited:
• Current: Only the currently selected pad can be edited.
• Multiple: All selected pads can be edited simultaneously.
• All: All pads can be edited simultaneously.
To close the window, tap Close, the X, or anywhere outside the window.
Tip: You can immediately select multiple pads while on any tab in Track Edit Mode (regardless of the current Edit Zones
setting) by pressing and holding the Shift button and pressing each desired pad. The Edit Zones setting will
automatically change to Multiple.
To Next Page
Loading...
