213
Sends
The Sends tab gives you an overview of the Sends 1–4 level of your tracks.
Use the M and S buttons to mute and solo the track. When Cue Tracks is enabled, the S button will become a
Headphones button.
Use the automation button to set the automation status of the track. See General Features > Automation for
more information on automation.
Use the record button to arm the track for recording.
Use the send knobs to adjust the send level of tracks. Tap the knob and use the data dial or –/+ buttons to adjust
the level.
To learn how to use send effects, please see General Features > Effects > Send/Return Effects.
Important: When using send channels, make sure you have already loaded at least one effect to it using the return
mixer. See Returns below to learn how to do this.
To Next Page
Loading...
