77
Keygroups
You can load up to four insert effects to each keygroup. You can do this in the Pad Mixer or Track Edit Mode.
Important: When using keygroup insert effects, they will be applied to that keygroup only. Keep this in mind if you load
insert effects to multiple keygroups with overlapping note ranges—the effects will overlap in that range as well.
To load a keygroup insert effect in the Pad Mixer:
1. Tap the Inserts & I/O tab at the bottom of the screen.
2. Tap an insert slot to open the effects window and use it to load or edit effects.
To load a keygroup insert effect in Track Edit Mode, tap the Effects tab at the bottom of the screen and then use the
screen that appears to load or edit effects.
Important: Remember that the effect will be applied to that keygroup only.
To Next Page
Loading...
