185
To play a slice, when the headphones icon (in the upper-right corner) is selected, tap a slice in the waveform.
When the One Shot feature is enabled, you can press a pad once to play the entire slice. When this is disabled,
pressing the pad and holding it will play the slice; releasing it will stop playback.
To enable or disable One Shot, press and hold Shift, and then tap One Shot.
To select a slice to edit, do any of the following:
• Use the Slice field.
• When the knobs are in screen mode, turn Knob 6.
• When the headphones icon (in the upper-right corner) is selected, tap a slice in the waveform.
To add a slice at the current playhead position, tap Slice+ at the bottom of the screen. You can do this at any point
during sample playback.
To split or combine slices, tap the glue-and-scissors icon. In the Split/Combine Region screen that appears, tap
one of the following buttons:
• Split: This splits the currently selected region into two equal slices.
• Combine: This combines the currently selected region with the one before it.
• Back: This closes the window.
To Next Page
Loading...
