220
Use the Empty Pads field in the upper-left corner to set how empty pads will display:
• Empty pads off: Pads without any sounds will remain off.
• Empty pads dim: Pads without any sounds will remain more dimly lit than pads with sounds assigned.
• Empty pads normal: Pads without any sounds will appear the same as pads with sounds assigned.
Use the Single Pad/All Pads select to determine whether you are setting the color for a Single Pad or All Pads.
Tip: To quickly assign that color to all pads in the track, press and hold Shift while tapping a color button.
Use the color buttons to select which color you are assigning.
Tip: To select the color button corresponding a specific pad’s color, press and hold Shift, and then press the pad
or tap it on the screen.
Press a pad on your Force hardware or tap it on the screen to assign the selected color to it.
To Next Page
Loading...
