Akai FORCE

53
Alternatively, assign samples in a drum track in Track Edit Mode in one of these two ways:
1. Press Menu, and then tap Track Edit to enter Track Edit Mode. Alternatively, press and hold Shift and press Clip.
2. Tap the Samples tab. This lets you view the samples assigned to all four layers of the current pad as well as tuning
and level parameters for each layer.
3. Tap a pad to select it (and play its assigned samples, if any).
4. Tap one of the Layer fields under the sample waveform to select a layer. Tap the Sample field, and then use the
data dial or –/+ buttons to select a sample. Alternatively, double-tap the field for a layer, and then tap a sample to
select it.
1. Press Menu, and then tap Track Edit to enter Track Edit Mode. Alternatively, press and hold Shift and press Clip.
2. Tap the Pan Velocity tab. This lets you view the samples assigned to all four layers of the current pad as well as
panning and velocity ranges of each layer.
3. Tap a pad to select it (and play its assigned samples, if any).
4. Tap one of the Layer fields to select a layer, and then use the data dial or –/+ buttons to select a sample.
Alternatively, double-tap the field for a layer, and then tap a sample to select it.