55
To assign samples in a keygroup track:
1. Press Menu, and then tap Track Edit to enter Track Edit Mode. Alternatively, press and hold Shift and press Clip.
2. Tap Samples. This lets you view the samples assigned to all four layers of the current keygroup as well as tuning
and level parameters for each layer.
3. Tap the Number of KG field, and then use the data dial or –/+ buttons to set the number of keygroups in the track (1–
128). Alternatively, double-tap the Number of KG field, and then use the numeric keypad on the screen.
4. Tap the Keygroup field, and then use the data dial or –/+ buttons to select a keygroup. Alternatively, double-tap the
Keygroup field, and then tap a keygroup to select it.
5. Tap the field for a layer, and then use the data dial or –/+ buttons to select a sample. Alternatively, double-tap the
field for a layer, and then tap a sample to select it.
To create complex keygroup track, you can add more keygroups (up to 128). This is useful when working with multi-
samples (e.g., when programming a real piano).
Tip: Remember that a keygroup track offers up to 128 keygroups, and each keygroup can hold up to four samples
(Layers 1–4). This is a total of 512 samples.
To Next Page
Loading...
