Akai GX-65 MKII

Tape
Dubbing
:
Making
a
copy
from
an
original
tape
For tape dubbing, normally connect both cassette decks to
the amplifier. Refer to the amplifier's operator’s manual for
operation details.
it is also possible to connect directly, deck to deck. Set the
recording controls (noise reduction, recording level, etc.) ex-
actly as you would for standard recording.
Recording with microphones
To record from microphones it will be necessary to connect
a
microphone
mixer
(not
included)
to
the
LINE
IN
jacks
of
the
cassette
deck.
The
microphones
can
then
be
connected
to
the
microphone
mixer.
Connections
Cassette deck for playback
Cassette deck for recording
To output jacks of a microphone mixer
Auto
stop
mechanism
This
cassette
deck
is
equipped
with
an
auto
stop
mechan-
ism
that
automatically
stops
the
tape
when
it
has
been
fully
fast
forwarded,
fast
rewound
or
at
the
end
of
playback
or
re-
cording.