Akai MINIAK

20
Take a moment to
cycle through these
options. Press
[MULTI] and turn the
DATA DIAL to select a
Multi to edit. Then
press the DATA DIAL
to enter edit mode.
Turn the DATA DIAL
clockwise to cycle
through the various
parts. Parts are
labeled as "Part A,"
"Part B," "Part C," etc.
After the last part, you
will see that you can
add a part.
Turn the DATA DIAL
further to cycle
through all of the
beats. Beats are
labeled "Beat A,"
"Beat B," "Beat C,"
etc. – just like parts.
After the last beat,
you can add a new
beat.
Keep turning the
DATA DIAL
clockwise to cycle
through screens
dedicated to the
effects. These
screens will vary
depending on the
effect you choose.
Finally, you'll see the
clear, name, delete,
MIDI SysEx, and
copy screens.
MULTI OPTIONS
(1 OF 2)
MULTI OPTIONS
(2 OF 2)