WARNING
Power requirements for electrical equipment vary from area to area. Please ensure that
your S3200 meets the power requirements in your area. If in doubt, consult a qualified
electrician or Akai Professional dealer.
120V @ 60Hz for USA and Canada
220V-230V @ 50Hz for Europe (excluding UK)
240V @ 50Hz for UK and Australia
PROTECTING YOURSELF AND THE S3200
★
Never touch the AC plug with wet hands.
*
Always disconnect the S3200 from the power supply by pulling on the plug, not the
cord.
*
Allow only an Akai Professional dealer or qualified professional engineer to repair
or reassemble the S3200. Apart from voiding the warranty, unauthorized engineers
might touch live internal parts and receive a serious electric shock.
*
Do not put, or allow anyone to put any object, especially metal objects, into the
S3200.
★
Use only a household AC power supply. Never use a DC power supply.
*
If water or any other liquid is spilled into or onto the S3200, disconnect the power,
and call your dealer.
*
Make sure that the unit is well-ventilated, and away from direct sunlight.
*
To avoid damage to internal circuitry, as well as the external finish, keep the S3200
away from sources of direct heat (stoves, radiators, etc.).
*
Avoid using aerosol insecticides, etc. near the S3200. They may damage the
surface, and may ignite.
*
Do not use denaturated alcohol, thinner or similar chemicals to clean the S3200.
They will damage the finish.
*
*
Make sure that the S3200 is always well-supported when in use (either in a
specially-designed equipment rack, or a firm level surface).
When installing the S3200 in a 19" rack system, always allow 1U of ventilated free
space above it to allow for cooling. Make sure that the back of the rack is
unobstructed to allow a clear airflow.
To Next Page
Loading...
