Akai VS-2EGN

ADJUSTMENT ADJUSTMENT
STEP} ITEM INPUT MODE | TEST POINT PARTS RESULT & REMARKS
Test Tape
PBY PB TPS VR12
13 | PBY Level | (47.750797)
Adjust so that the video output is
1,00£0.02Vp-p.
Limiter Test Tape
14 Balance (AT-750797) PB TPS VRO
I
Adjust VR9 so that the carrier leak
is minimum at H. SYNC.
15 | Local OSC | cat rsgton| PB TP14 vc3 | 4.4336 19MHz10Hz
PB Chroma
Test Tape
16 eD (AT-750797) PB TPS VR13
Adjust so that a cyan level is within
0.5540.01Vp-p.
PB Chroma
Test Tape
17 1
NSO) (ar-7s0798)| PB Te ve
Adjust VR14 so that a cyan level is
within 0.55£0.01Vp-p.
PB Chroma
Test Tape
18 Level
eons (at-750799)| PB TPS VRI5
Adjust VR15 so that a magenta level
is within 0.23+0.02Vp-p.
114
‘Service Manual VS-2EGN: