Safety precautions (Be sure to comply)
Check the location of the car's pipes,
water tanks and wires before installation.
When drilling holes in the car to install
the product, make sure the product
does not come in contact with pipes,
water tanks or electrical wires. At the
same time, take measures to prevent
parts from rusting and flooding.
Otherwise, it may result in fire, electric
shock or accident.
Suitable for DC12/24V vehicles.
This product is only suitable for
DC12/24V vehicles. It cannot be
used for cars other than the above.
Otherwise, it may cause fire or
malfunction.
Do not use the product in a faulty or
abnormal condition.
Do not use the product in the presence
of smoke or peculiar smell, which may
lead to fire.
● Stop using the product immediately
and consult customer service.
Do not disassemble or modify.
There are high-voltage components
inside, which may cause fire or electric
shock.
●Professional engineers conduct
internal inspections, adjustments and
maintenance.
Do not put small parts where children can
reach them.
Children may accidentally swallow
small parts. If already swallowed,
consult a doctor immediately.
Do not allow water or foreign objects to
enter the inside of the device.
If metal or flammable materials enter
the inside of the device, it will not only
malfunction, but also generate heat
due to short-circuit or poor insulation,
which may cause fire, smoke, or
electric shock. Please be careful not
to spill the drink on it.
Wiring and installation/removal should be
done by professional technicians.
Wiring and installation / removal
require professional skills and
experience.
Do not use it for any other purpose
except for vehicle use.
If it is used for non-vehicle purposes
(for example, recreational boats or
outdoors), it may cause smoke, fire,
electric shock, injury or malfunction.
Do not give this product a strong shock.
Dropping, hitting, or impacting the
device in other ways may cause
malfunction or fire.
Please make sure to make the specified
parts.
The use of non-designated parts may
damage the inside of the equipment,
and improper installation may cause
equipment failure or cause accidents
and fires.
2