Note:
3.3 Aligning the
Microphone
Fig. 7: Adjusting
the gooseneck.
Refer to fig. 7.
3.4 Adjusting the
Microphone Arm
Fig. 8: Adjusting
the microphone
arm.
Refer to fig. 8.
• Both the headband and temple pieces are
made of spring steel wire. If you bend the wire
too hard it may be extremely difficult to bend
the wire back to the desired shape.
• Adjust the gooseneck so as to point the micro-
phone at the corner of your mouth.
1. Unsnap the goose-
neck (1) from the
holder (2).
2. Snap the gooseneck
(1) back into the
holder (2) at the
desired position.
3 Using Your Microphone
18
AKG C 520/C 520 L
To Next Page
Loading...
