5 Specifications
Type: 1-inch large-diaphragm backplate pressure
gradient microphone
Polar patterns: cardioid
Open-circuit sensitivity: 20 mV/Pa (-34 dBV)
Frequency range: 20 to 20,000 Hz (see frequency
response graphs)
Impedance: ≤ 200 ohms
Recommended load impedance: ≥ 1000 ohms
Bass cut filter slope: 6 dB/octave at 160 Hz
Preattenuation pad: 0/-20 dB (switchable)
Equivalent noise level to
IEC 60268-4 (A-weighted):
13 dB(A) (0 dB preattenuation)
Signal/noise ratio re 1 Pa (A-weighted): 81 dB
Max. SPL for 0.5% THD: 136/156 dB SPL (0/-20 dB)
Dynamic range (A-weighted): 123/143 dB (0/-20 dB)
Environment: temperature: -10°C to +60°C
R.H.: 95% (+20°C); 85% (+60°C)
Powering: 12 to 52 V phantom power
to IEC 61938
Current consumption: < 2 mA
Connector: IEC standard 3-pin XLR
Dimensions: 54 x 43 x 160 mm / 2.1 x 1.7 x 6.3 in.
Net weight: 290 g / 10.2 oz.
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the De-
claration of Conformity, visit http://www.akg.com or contact sales@akg.com.
28 C 214
To Next Page
