Akiles Cardmac Pro - Factory Setting Loaded; Self Sharpening Method; Customize Mode Operation Method

13
2) Select it (2) via [+] or [-] key.
3) Press [Mode Changeover] key to return to the standby state.
Factory Setting Loaded
1) When [Set Parameter] is pressed thirteen times, the LCD will show:
2) Press [+], [-] key, the ex-works set-up is recovered and the machine shall restart or press [Mode
Changeover] key to give up and return to the standby state.
Self Sharpening Method
1) Continually press the [Set Parameter] key til the LCD displays:
2) Press [+] button to start the blade self-sharpening.
3) Press [-] button to stop the self-sharpening.
Customize mode Operation Method
1) Continually press the [Mode Changeover] key til the LCD displays the asterisk * after the dimension
2) Press [Set Parameter] button and hold for more than 2 seconds, until the LCD displays:
3) Adjust it via [+] or [-] key (Note: Press[+] or [-] button and hold for more than 1 second, to adjust quickly.
4) Press [Set Parameter] key, til the LCD displays:
5) Adjust it via [+] or [-] key.
6) Press [Set Parameter] key, til the LCD displays:
Long Blade Self-
Sharpening
Rotary Blade Self-
Sharpening
OR
00XX XXXX
3.5 x 1.57* in
Card Length:
XXX in
Gutter:
XX in
Row number of cards:
XX